If you’re hear a rushing noise, don’t be alarmed — that’s just the rapidly approaching 2024 Hackaday Supercon. As hard as it is to believe, a whole year has gone by, and we’re now just a few days away from kicking off our annual hardware hacking extravaganza in Pasadena. Tickets just sold out over the weekend — thank you procrastinators!

For those of you who have tickets to join us this weekend, we’ve got a few last minute announcements and bits of information we wanted to get out to you. As a reminder, you can find the full schedule for all three days on the official Supercon site.

New Events Added!

For those who’ve attended a Supercon before, you know we like to cram as much content as we can into the weekend. But there’s always room for more, and this year we’ve managed to squeeze in a couple extra activities that we’re very excited about.

Halloween Hacker Happy Hour

It just so happens that Halloween is the night before Supercon officially kicks off, and that seemed like too good of an opportunity to pass up. So we’ll be throwing a pre-event party at the nearby KingsRow Gastropub where costumes and all manner of blinking LEDs are very much encouraged. Officially we’ll be hanging out from 7:00 to 10:00 PM, but don’t be surprised if you find yourself still talking to Hackaday folks at last call.

You don’t need tickets for this event, but we’d like to have a rough head count, so if you could RSVP through Eventbrite we’d appreciate it.

Tina’s Junk Challenge

We’ve always wanted to introduce some kind of swap meet aspect to Supercon, but the logistics have always been a challenge. This year though, we’re finally going to get the chance to test out the idea. Former DesignLab Resident Tina Belmont is in the process of moving out of the country and needs to find a new home for her electronic bric-a-brac.

Everything is free, so attendees are encouraged to take anything they think they can make use of. Naturally, an influx of interesting hardware could provide for some very unique badge hacking possibilities. If we can get enough people to graft these second-hand components onto their badges, we just might be able to turn it into a proper category come Sunday night.

A table where folks can offload their electronic bits and bobs has worked well at other hacker cons, so we’re eager to see how it goes at Supercon. If this is something you’d like to see more of, or would potentially like to participate in next year, let us know.

Krux’s Side Quests

Let’s be honest, most of us are already taking our marching orders from the computer in one way or another. So why not turn it into a fun interactive game?

The idea is simple: use the mysterious retrocomputer oracle, and it gives you a quest. Maybe you’ll have to find a hidden item, or solve a riddle. Krux has a run a variation of this game at Toor Con in the past, but the challenges spit out by the computer this time will be tailored to Supercon.

Windows Through Wires Exhibition

You may recall that we asked the Hackaday community if they had any unusual display technology they’d like to show off during Supercon as part of an exhibit.

Well, as you might have imagined, the response was incredible. From gorgeous vintage pieces to completely custom hardware, there’s going to be a wide array of fascinating hardware for attendees to study up-close.

While getting a chance to see various display technologies throughout the years would have our attention as it is, what’s really exciting is that many of the custom-built devices in the exhibit are either projects hosted on Hackaday.io or ones that we’ve covered at some point on the front page.

Considering how gorgeous some of them have looked in photographs, we’re eager to drool over them in the real world — and we bet you are to.

Workshop Technical Difficulties

Hopefully we’ve provided enough good news that we can slip in a bit of the bad. Unfortunately, we’ve had to cancel the “Hands on with an Electron Microscope” workshop that was to be hosted by Adam McCombs and Isabel Burgos. Everyone with tickets will of course be getting a refund, and you should be receiving an email to that effect shortly if you haven’t already.

While we’re just as disappointed by this news as you are, it’s one of those situations where there simply weren’t any good solutions. Long story short, the scanning electron microscope that was small enough to bring to Supercon is down, and there’s just not enough time to get it up and running at this point. An attempt was made to find another small-ish electron microscope on short notice but…well, that’s just as tricky to pull off as it sounds.

Send Us Your Lightning Talks!

To end this update on a high note, we want to remind everyone that this year we’ll once again be going Lighting Talks on Sunday morning. If you’ve never given a talk before, the shorter seven minute format is perfect for getting your feet wet. Or maybe you’ve got something you want to talk about that doesn’t take a whole hour to explain. Either way, the Lightning Talks are a great way to share what your passionate about with the Supercon audience.

If you’d like to give a Lightning Talk, simply fill out this form. You can upload slides if you’ve got them, but they aren’t strictly necessary.

Like everyone else, we’re scattered all over the web. We would be silly not to be getting our information out there in as many ways as we can manage. We promise that the site always comes first, but you can also find us on Facebook, G+ (yes, we’re approved this time), twitter, and we even have a flickr group where people post pictures of their projects!

We’ve got some stuff planned for the near future that we’re excited about too.

1.We’re working behind the scenes to bring out a new template for the site. This will allow us to clean things up a bit and hopefully make browsing a little easier (searching too!). Don’t worry, we’re not changing the logo.

2.We are also planning on starting some “show and tell” sessions on G+. We love what Adafruit has been doing with theirs, and we’re hoping to join in on the fun. We realize some of you are opposed to g+, so feel free to offer other solutions to do the show and tell, we would be happy to hear them. They will be recorded and linked on the site here, so you can follow along even if you can’t join.

3.We’re bringing back the store! This time, however, we’ll have a full spread of stuff. We’re not making it in our garages anymore. For now, it will be clothing and accessories, but we’re considering doing some electronics and tools in the near future as well.

The writers are also very busy with things on the web. We’re not always locked to our keyboards slaving away. If you want to be able to follow along with us, you can find our information after the break.

Mike Szczys
Site:jumptuck.com
Twitter: @szczys

Mike Nathan
Site: Geek-republic.com
Twiter: @mikenathan_
g+: here

Brian Benchoff
site: brianbenchoff.wordpress.com/

Adam Munich
Site: teravolt.org
twitter: @adammunich

Jeremy Cook
Site: jcopro.net/
Twitter: @JeremySCook

Jesse Congdon
Facebook: JWCongdon

Caleb Kraft
site: calebkraft.com
Facebook: caleb.kraft
g+: here