If you’re hear a rushing noise, don’t be alarmed — that’s just the rapidly approaching 2024 Hackaday Supercon. As hard as it is to believe, a whole year has gone by, and we’re now just a few days away from kicking off our annual hardware hacking extravaganza in Pasadena. Tickets just sold out over the weekend — thank you procrastinators!

For those of you who have tickets to join us this weekend, we’ve got a few last minute announcements and bits of information we wanted to get out to you. As a reminder, you can find the full schedule for all three days on the official Supercon site.

New Events Added!

For those who’ve attended a Supercon before, you know we like to cram as much content as we can into the weekend. But there’s always room for more, and this year we’ve managed to squeeze in a couple extra activities that we’re very excited about.

Halloween Hacker Happy Hour

It just so happens that Halloween is the night before Supercon officially kicks off, and that seemed like too good of an opportunity to pass up. So we’ll be throwing a pre-event party at the nearby KingsRow Gastropub where costumes and all manner of blinking LEDs are very much encouraged. Officially we’ll be hanging out from 7:00 to 10:00 PM, but don’t be surprised if you find yourself still talking to Hackaday folks at last call.

You don’t need tickets for this event, but we’d like to have a rough head count, so if you could RSVP through Eventbrite we’d appreciate it.

Tina’s Junk Challenge

We’ve always wanted to introduce some kind of swap meet aspect to Supercon, but the logistics have always been a challenge. This year though, we’re finally going to get the chance to test out the idea. Former DesignLab Resident Tina Belmont is in the process of moving out of the country and needs to find a new home for her electronic bric-a-brac.

Everything is free, so attendees are encouraged to take anything they think they can make use of. Naturally, an influx of interesting hardware could provide for some very unique badge hacking possibilities. If we can get enough people to graft these second-hand components onto their badges, we just might be able to turn it into a proper category come Sunday night.

A table where folks can offload their electronic bits and bobs has worked well at other hacker cons, so we’re eager to see how it goes at Supercon. If this is something you’d like to see more of, or would potentially like to participate in next year, let us know.

Krux’s Side Quests

Let’s be honest, most of us are already taking our marching orders from the computer in one way or another. So why not turn it into a fun interactive game?

The idea is simple: use the mysterious retrocomputer oracle, and it gives you a quest. Maybe you’ll have to find a hidden item, or solve a riddle. Krux has a run a variation of this game at Toor Con in the past, but the challenges spit out by the computer this time will be tailored to Supercon.

Windows Through Wires Exhibition

You may recall that we asked the Hackaday community if they had any unusual display technology they’d like to show off during Supercon as part of an exhibit.

Well, as you might have imagined, the response was incredible. From gorgeous vintage pieces to completely custom hardware, there’s going to be a wide array of fascinating hardware for attendees to study up-close.

While getting a chance to see various display technologies throughout the years would have our attention as it is, what’s really exciting is that many of the custom-built devices in the exhibit are either projects hosted on Hackaday.io or ones that we’ve covered at some point on the front page.

Considering how gorgeous some of them have looked in photographs, we’re eager to drool over them in the real world — and we bet you are to.

Workshop Technical Difficulties

Hopefully we’ve provided enough good news that we can slip in a bit of the bad. Unfortunately, we’ve had to cancel the “Hands on with an Electron Microscope” workshop that was to be hosted by Adam McCombs and Isabel Burgos. Everyone with tickets will of course be getting a refund, and you should be receiving an email to that effect shortly if you haven’t already.

While we’re just as disappointed by this news as you are, it’s one of those situations where there simply weren’t any good solutions. Long story short, the scanning electron microscope that was small enough to bring to Supercon is down, and there’s just not enough time to get it up and running at this point. An attempt was made to find another small-ish electron microscope on short notice but…well, that’s just as tricky to pull off as it sounds.

Send Us Your Lightning Talks!

To end this update on a high note, we want to remind everyone that this year we’ll once again be going Lighting Talks on Sunday morning. If you’ve never given a talk before, the shorter seven minute format is perfect for getting your feet wet. Or maybe you’ve got something you want to talk about that doesn’t take a whole hour to explain. Either way, the Lightning Talks are a great way to share what your passionate about with the Supercon audience.

If you’d like to give a Lightning Talk, simply fill out this form. You can upload slides if you’ve got them, but they aren’t strictly necessary.

We’ve been hinting at it for a few months now, running a series of articles on SAOs, then a Supercon Add-On Challenge. We even let on that the badge would have space for multiple SAOs this year, but would you believe six?

Way back in 2017ish, Hackaday’s own [Brian Benchoff] and the [AND!XOR] crew thought it would be funny and useful to create a “standard” for adding small custom PCB art-badges onto bigger conference badges. The idea was to keep it quick and dirty, uncomplicated and hacky, and the “Shitty” Add On was born. The badge community took to this like wildfire. While the community has moved on from the fecal humor, whether you call these little badgelets “SAOs”, “Simple Add-Ons”, or even “Supercon-8 Add Ons”, there’s something here for everyone. So if you’ve already got some SAOs in a drawer, bring them to this year’s Supercon and show them off!

But you don’t need to bring your own SAOs. We thought that as long as we were providing six SAO ports, we’d provide you with a small starter collection: four of them, in fact. A fantastic capacitive touch wheel designed by [Todbot], a beautiful spiral petal matrix of LEDs designed by [Voja Antonic], a completely blank-slate protoboard petal, and an I2C-enabled microcontroller proto-petal.

Bringing it all together, of course, is the main badge, which sports a Raspberry Pi Pico W on the back-side, for WiFi and Bluetooth connectivity. This badge is intended to be a showcase of SAOs, and we thought that there have always been some under-explored corners of the spec. The most recent six-pin standard has power, ground, two GPIO pins, and an I2C pair. How often do we see SAOs that only use the power lines? This year, that changes!

Every GPIO pin on all six SAO slots is individually accessible, and the Pi Pico’s two hardware I2C peripheral busses are broken out on the left and right sides of the badge respectively. (Have an I2C enumeration conflict? Just move one of the offenders to the other side.) The idea here, combined with the wireless features and a trio of buttons on the front, is to give you a big sandbox to explore the possibilities of SAOs that go farther than just art.

Many Ways to Play

Straight out of the gate, the touch wheel and the LED petal matrix invite you to play with them, all the while fooling you into learning a little bit about interfacing I2C devices. You see, I2C devices have a unique address, and the rest of the functionality is handled by as if they were memory-mapped peripherals. What does this mean? If you want to ask the touch wheel where your finger is, you simply query its memory location 0. To set the LED colors, you write bytes to memory locations 15, 16, and 17 for red, green, and blue, respectively. Each spiral arm of the LED matrix petal is simply a byte in memory – write to it and the blinkies blink.

The take-home: I2C devices are fun and to play with. And when you start combining the functions of multiple SAOs, you can really start getting creative. But we’ve only scratched the surface. The I2C proto petal includes a CH32V003 chip, with its own dedicated I2C device hardware peripheral, so if you have essentially anything that you can solder to it, you can turn that into an I2C-enabled device to add to the party.

This is a multi-lingual party, though. The main badge, and all of the connection logic, runs on MicroPython. This makes it just a few lines of code to display your finger presses on the touchwheel over on the LED petal matrix, for instance, and we’ll have some demo code to ease you in. (And we’re frantically writing more!) But the I2C protoboard requires a little bit of C. If you’ve got a CH32V003 environment set up, by all means bring it – we love [CHLohr]’s CH32V003fun. We’re working on getting the badge board to program the CH32 in-situ, and we’re 99% sure we’ll have that ready by showtime. We’ll have demo code here to get you started as well. Will you program your first RISC-V chip at this year’s Supercon?

But say you don’t want anything to do with all this software? Just give me the solder! The blank-slate protoboard is for you. It breaks out the SAO lines, and gives you maximal room for creative hardware play. Heck, you could solder an LED, a resistor, and call it done. Or play around with the possibilities of the GPIOs. Low-code or no-code, the choice is yours.

Participate!

We know you’re all looking forward to getting your hands on the badge and the SAOs and getting creative. Here is the 2024 Supercon SAO Badge GitHub repository, for your perusal. All of the design files that we have are there in the hardware directory, but the code is not yet complete. If you want to design a 3D-printed case or add-on, you’ll find the vector files in PDF.

As usual [Voja] makes his circuit diagrams by hand, so you’ll find a beautifully annotated schematic that lets you know where each and every pin goes. If you’re not feeling the AA battery love, you’ll see that [Voja] has left you some pads to hook up an external power supply, for instance.

But the software is a work in progress, and in particular, we don’t know what I2C devices you’ll be bringing with you. We’re going to include as many MicroPython I2C device libraries as we can find, from OLED screens to magnetometers, and we’d like them to be on the default conference image. So if you’ve a device that you’d like us to support, either drop a link in the comments below or add the code in the libraries folder and submit a pull request! We’ll be flashing these at the absolute last minute, of course, but please get it in this weekend if you can.

Supercon!

Supercon 8’s badge is the unofficial world-record holder for the most SAO connectors on any official conference badge, but it also aspires to encourage you to play around with the functional aspects of our favorite mini-badge form factor. Heck, maybe you’ll learn a thing or two about I2C along the way? Push some GPIOs around? Or maybe you’ll just have a fun weekend with a soldering iron, some stellar talks, and some great company. Whatever it’s going to be, we can’t wait to see you all, and to see what you come up with!

If you have any questions about the badge, fire away in the comments here.

You do have your tickets already, right? See you soon!

(C3P0 add-on by [kuro_dk] and Cyclops by [Simenzhor] not included.)

The third and final round of the 2024 Supercon talks announcements brings us to the end, and the full schedule is now up on Hackaday.io.

With Supercon just a couple weeks away, we hope you have your tickets already! Stay tuned tomorrow for a badge reveal.

(Go get your tickets already. And if you’ve got ’em, see you soon!)

With the 2024 Hackaday Supercon just a couple weeks away, we’re pleased to announce that the official site for the three-day event is now live!

On the brand-new Supercon page, you can find a listing of all of our fantastic speakers, the hands-on workshops, and perhaps most importantly, the schedule of when everything is happening. As always, Supercon is jam-packed with incredible content, so you’ll want to consult with the schedule to navigate your way through it. Don’t worry if it ends up that two talks you want to see are scheduled for the same time — we’ll be recording all of the talks and releasing them on the Hackaday YouTube channel, so you won’t miss out.

If you’re still on the fence, we do have a few tickets left at the time of this writing. All of the workshops are full at this point, but you can still get on the waiting list for a few of them just in case a spot opens up.

There are a lot of fantastic things about Hackaday Supercon, but for me personally, the highlight is always seeing the dizzying array of electronic bits and bobs that folks bring with them. If you’ve never had the chance to join us in Pasadena, it’s a bit like a hardware show-and-tell, where half the people you meet are eager to pull some homemade gadget out of their bag for an impromptu demonstration. But what’s really cool is that they’ve often made enough of said device that they can hand them out to anyone who’s interested. Put simply, it’s very easy to leave Supercon with a whole lot more stuff than when you came in with.

Most people would look at this as a benefit of attending, which of course it is. But in a way, the experience bummed me out for the first couple of years. Sure, I got to take home a literal sack of incredible hardware created by members of our community, and I’ve cherished each piece. But I never had anything to give them in return, and that didn’t quite sit right with me.

So last year I decided to be a bit more proactive and make my own Simple Add-On (SAO) in time for Supercon 2023. With a stack of these in my bag, I’d have a personalized piece of hardware to hand out that attendees could plug right into their badge and enjoy. From previous years I also knew there was something of an underground SAO market at Supercon, and that I’d find plenty of people who would be happy to swap one for their own add-ons for mine.

To say that designing, building, and distributing my first SAO was a rewarding experience would be something of an understatement. It made such an impression on me that it ended up helping to guide our brainstorming sessions for what would become the 2024 Supercon badge and the ongoing SAO Contest. Put simply, making an SAO and swapping it with other attendees adds an exciting new element to a hacker con, and you should absolutely do it.

So while you’ve still got time to get PCBs ordered, let’s take a look at some of the unique aspects of creating your own Simple Add-On.

Low Barrier to Entry

To start with, let’s cover what’s probably the biggest benefit of making an SAO versus pretty much any other kind of electronic device: essentially all the hard work has been done for you, so you’re free to explore and get creative.

Consider the SAO standard, such as it is. You know there’s going to be 3.3 volts, you know physically how your device will interface with the host badge, and should you decide to utilize it, there’s an incredibly common and well-supported protocol (I2C) in place for communication with other devices.

There’s even a pair of GPIO pins thrown in for good measure, which more nuanced versions of the SAO spec explain can be used as the clock and data pins for addressable LEDs. In either event, they provide an even easier way to get your SAO talking to whatever it’s plugged into than I2C if that’s what you’re after.

Not having to worry about power is a huge weight off your shoulders. Voltage regulation — whether it’s boosting the output from a battery, or knocking down a higher voltage to something that won’t fry your components — can be tricky, and has been known to trip up even experienced hardware hackers. There’s admittedly some ambiguity about how much current an SAO can draw, but unless you’re looking to push the envelope, it’s unlikely anything that fits in such a small footprint could pull enough juice to actually become a problem.

Minimal Investment

Another thing to consider is the cost. While getting PCBs made today is cheaper than ever, the cost still goes up with surface area. Especially for new players, the cost of ordering larger boards can trigger some anxiety. Luckily, the traditional SAO is so small that having 20, 30, or even 50 of them made won’t hit you too hard in the wallet. Just as an example, having 30 copies of the PCB for my first SAO fabricated overseas cost me around $12 (shipping is the expensive part).

In fact, an SAO is usually small enough that a quick-turn prototype run with one of the domestic board houses might be within your budget. I’ve been playing around with a new SAO design, and both DigiKey and OSH Park quoted me around $40 to have a handful of boards produced and at my doorstep within 5 to 7 days.

Now assembly of your SAOs, should you outsource that, can still be expensive. Even though they’re small, it’s all going to come down to what kind of parts you’re using in the design. I was recently talking to Al Williams around the Hackaday Virtual Water Cooler, and he mentioned the cost to have just a handful of his SAO made was in the three figures. Then you look at the parts he used in the design, and it was clear this was never going to be a cheap build.

But even if you’ve got deep enough pockets to pay for it, I’d personally recommend against professional assembly in most cases. Which leads nicely into my next point…

A Taste of Mass Production

Being hobbyists, the reality is that most of us never get the opportunity to build more than a few copies of the same thing. For a personal project, there’s rarely the need to build more than one — and even if you count the early prototypes or failed attempts, it’s unlikely you’d hit the double digits.

But for an SAO, the more the merrier. If you’re planning on swapping with others or giving them away, you’ll obviously want quite a few of them. There’s no “right” number here, but for an event the size of Supercon, having 50 copies of your SAO on-hand would be reasonable. As mentioned earlier, I went with 30 (in part due to the per-unit cost) and in the end felt I should have bumped it up a bit more.

But even at 30, it was far and away the largest run of any single thing I’d ever done. After assembling the third or fourth one, I started to pick up on tricks that would speed up the subsequent builds. Where applicable, hand-soldering quickly gave way to reflowing. After some initial struggling, I realized taking the time to make a jig to hold the more fiddly bits would end up saving me time in the long run. Once ten or so were in various states of completion, it became clear I needed some way to safely hold them while in production, so I ended up cutting a couple board holders out of wood on the laser cutter.

Looking back, this part of the process was perhaps what I enjoyed the most. As you might expect, I’ve been involved with  badge production at significant scales in the past. If you have a Supercon badge from the last several years, there’s an excellent chance I personally handled it in some way before you received it. But this was an opportunity to do everything myself, to solve problems and learn some valuable lessons.

Finding a New Community

Finally, the most unique part of making your own SAO is that it’s a ticket to a whole new subculture of hardware hacking.

There are some incredibly talented people making badges and add-ons for the various hacker cons throughout the year, and there’s nothing they like better than swapping their wares and comparing notes. These folks are often pushing the very limits on what the individual hacker and maker is capable of, and can be a wealth of valuable information on every aspect of custom hardware design and production.

When you put your creation up on the SAO Wall at Supercon, or exchange SAOs with somebody, you’re officially part of the club, and entitled to all the honors and benefits occurring thereto. Don’t be surprised if you soon find yourself on a private channel in an invite-only chat server, pitching ideas for what your next project might be.

With a little over a month to go before the 2024 Hackaday Supercon kicks off in Pasadena, and a couple weeks before the deadline on submissions for the Supercon Add-On Contest, there’s still time to throw your six-pin hat into the ring. We can’t wait to see what you come up with.

It’s honestly amazing the range of fascinating talks we have lined up for this year’s Supercon. From art robots that burp and belch to gliders returning from near-space, from hardcore DSP to DIY PCBs, and sketching with machines, Hackaday’s Supercon is like nothing else out there.

And in case you’re already coming, you don’t have a talk slot reserved, but you’ve still got something that you want to say, please sign yourself up for a Lightning Talk! In the spirit of the Lightning, we’ll be taking submissions up to the absolute last minute, and we will fit in as many short talks as possible, but when it does fill up, we’ll be giving priority to those who got in first.

We’ve got one more speaker announce coming up, and of course our keynote speaker and the badge reveal. Supercon will sell out so get your tickets now before it’s too late. So without further ado, here is our next round of stellar speakers!

[If you read this far, you probably want tickets. Just sayin’.]

Our workshop ticket sales go live today at 8 AM PDT! If you’re coming to Supercon, and you’re interested, go get your workshop ticket before they all sell out!

There will be a change to this year’s workshop ticket limits. We heard our community’s feedback, and in the spirit of giving as many people as possible the opportunity to enjoy a workshop, we are limiting sign up to one workshop per attendee. If there are extra tickets by October 18th, we will allow folks to sign up for additional workshops.

If you register for more than one workshop we will refund you the ticket for the others based on the timestamp that you registered for each ticket (leaving only the ticket for the first workshop you registered for). We hope everyone understands our goal is to allow more people to experience a Supercon workshop due to limited space.

And of course, you can’t join in the workshops at Supercon without coming to Supercon. So get your tickets now if you haven’t already.

Stay tuned tomorrow for more speaker announcements!