So far in this series, we’ve talked about man-made byproducts — Fordite, which is built-up layers of cured car enamel, and Trinitite, which was created during the first nuclear bomb test.

But not all byproducts are man-made, and not all of them are basically untouchable. Some are created by Mother Nature, but are nonetheless dangerous. I’m talking about fulgurites, which can form whenever lightning discharges into the Earth.

It’s likely that even if you’ve seen a fulgurite, you likely had no idea what it was. So what are they, exactly? Basically, they are natural tubes of glass that are formed by a fusion of silica sand or rock during a lightning strike.

Much like Lichtenberg figures appear across wood, the resulting shape mimics the path of the lightning bolt as it discharged into the ground. And yes, people make jewelry out of fulgurites.

Lightning Striking Again

Lightning is among the oldest observed phenomena on Earth. You probably know that lightning is just a giant spark of electricity in the atmosphere. It can occur between clouds, the air, or the ground and often hits tall things like skyscrapers and mountaintops.

Lightning is often visible during volcanic eruptions, intense forest fires, heavy snowstorms, surface nuclear detonations, and of course, thunderstorms.

In lightning’s infancy, air acts as an insulator between charges — the positive and negative charges between the cloud and the ground. Once the charges have sufficiently built up, the air’s insulating qualities break down and the electricity is rapidly discharged in the form of lightning.

When lightning strikes, the energy in the channel briefly heats up the air to about 50,000 °F, which is several times the surface of the Sun. This makes the air explode outward. As the shock wave’s pressure decreases, we hear thunder.

Of Sand and Rock and Other Stuff

Fulgurites, also known as fossilized lightning, don’t have a fixed composition: they are composed of whatever they’re composed of at the time of the lightning strike. Four main types of fulgurites are officially recognized: sand, soil, caliche (calcium-rich), and  rock fulgurites. Sand fulgurites can usually be found on beaches or in deserts where clean sand devoid of silt and clay dominates. And like those Lichtenberg figures, sand fulgurites tend to look like branches of tubes. They have rough surfaces comprised of partially-melted grains of sand.

When sand fulgurites are formed, the sand rapidly cools and solidifies. Because of this, they tend to take on a glassy interior. As you might imagine, the size and shape of a fulgurite depends on several factors, including the strength of the strike and the depth of the sand being struck. On average, they are 2.5 to 5 cm in diameter, but have been found to exceed 20 cm.

Soil fulgurites can form in a wide variety of sediment compositions including clay-, silt-, and gravel-rich soils as well as leosses, which are wind-blown formations of accumulated dust. These also appear as tubaceous or branching formations, vesicular, irregular, or a combination thereof.

Calcium-rich sediment fulgurites have thick walls and variable shapes, although it’s common for multiple narrow channels to appear. These can run the gamut of morphological and structural variation for objects that can be classified as fulgurites.

Rock fulgurites are typically found on mountain peaks, which act as natural lightning rods. They appear as coatings or crusts of glass formed on rocks, either found as branching channels on the surface, or as lining in pre-existing fractures in the rock. They are most often found at the summit or within several feet of it.

Fact-Finding Fulgurites

Aside from jewelry and such, fulgurites’ appeal comes in wherever they’re found, as their presence can be used to estimate the number of lightning strikes in an area over time.

Then again there’s some stuff you may not necessarily want to use in jewelry making. Stuff that can be found in the dark, dank corners of the Earth. Stay tuned!

Wood burning, which goes by pyrography when it’s feeling fancy, has been an art form for centuries. [PapaJ06] puts a new twist on it by using a microwave oven transformer to generate fractal patterns in wood. We’ve seen these Lichtenberg figures before, but generally as electric discharges in acrylic sheets or crystal balls using multi-mega-electron volt accelerators. [PapaJ06]’s technique is considerably simpler and well within the reach of most would-be fractal artists, relying as it does on a transformer salvaged from a $20 Craigslist microwave.

But the extra twist that really brings the wow factor to the fractal patterns burned into the wood is the addition of some phosphorescent resin to fill the valleys carved by the electric discharge. [PapaJ06] carefully prepares the wood, fills the burns with glow powder mixed with epoxy resin, and finishes with a little sanding, linseed oil and polyurethane. The contrast between the charred and intact wood, and the way the resin fills the voids really brings out the fractal nature of the Lichtenberg figures.

[PapaJ06] doesn’t really show us too much about his process, but luckily [TheBackyardScientist] recently posted a video of his process for riding the lightning. Check it out after the break.

https://www.youtube.com/watch?v=BuG1oNRQnyI

[via reddit]

Some folks at the i3Detroit hackerspace had an opportunity come up that would allow them to capture lightning in acrylic. They created a few Lichtenberg figures thanks to the help of a plastic tubing manufacturer, some lead sheet and a bunch of 1/2″ thick acrylic.

Lichtenberg figures are the 3D electrical trees found in paperweights the world over. They’re created through electrical discharge through an insulator, with lightning being the most impressive Lichtenberg figure anyone has ever seen. These figures can be formed in smaller objet d’art, the only necessity being a huge quantity of electrons pumped into the insulator.

This was found at Mercury Plastics’ Neo-Beam facility, a 5MeV electron accelerator that’s usually used to deliver energy for molecular cross linking in PEX tubing to enhance chemical resistance. For one day, some of the folks at i3Detroit were able to take over the line, shuffling a thousand or so acrylic parts through the machine to create Lichtenberg figures.

When the acrylic goes through the electron accelerator, they’re loaded up with a charge trapped inside. A quick mechanical shock discharges the acrylic, creating beautiful tree-like figures embedded in the plastic. There are a lot of pictures of the finished figures in a gallery, but if you want to see something really cool, a lead-shielded GoPro was also run through the electron accelerator. You can check out that video below.

[Mark] just sent us in this fascinating example of Lichtenberg Figures, or more commonly known as Captured Lightning.

He just got married yesterday to his beautiful wife [Charlie] and they wanted to do something different for their bridal party. They chose to capture lightning inside acrylic spheres. Quite an impressive gift if we do say so ourselves!

The funny thing is, I was just reading [Theo Gray’s] Mad Science book which explains this phenomena. These Lichtenberg Figures are created by blasting a beam of high energy electrons at a piece of acrylic. Many of the electrons get trapped inside the acrylic and form a plane of charge. When the acrylic object gets struck with a grounding  stud, a discharge path is formed and all the electrons escape, leaving a completely unique lightning-like path in their tracks.

Unfortunately to make these you’re going to need a linear accelerator; a very expensive machine that [Mark] was lucky enough to use through his work. However the couple didn’t stop there, they also designed the lighted base using a PIC12F1501 micro-controller to finish off the gifts!

See how they were made after the break! Just a heads up, the video is very loud when the electrons are fired! If you’re wearing headphones keep the volume low.

[Thanks Mark!]